# How to Use the Stock Screener

> The Stock Screener filters thousands of listed stocks down to the ones that meet your criteria, such as market cap, P/E ratio, dividend yield or profit margin. Add filters, set each one to Over, Under, Between or Exactly a value, and the results table updates instantly with every company that passes all of them.

Source: https://bestshares.com/learning-center/stock-screener

Last reviewed: 2026-11-13

## What is a stock screener?

A **stock screener** is a filter for the stock market. Instead of researching companies one by one, you describe what you are looking for (for example *"large companies, P/E under 20, paying a dividend"*) and the screener returns every stock that matches.

The bestshares.com Stock Screener offers **159 filters** grouped into categories such as *Valuation & Ratios*, *Dividends*, *Margins*, *Technical Analysis*, *Forecasts* and *Company Info*. Over-the-counter (OTC) stocks are left out.

Why it matters: screening turns a vague idea into a short, repeatable list. It does not tell you what to own. It tells you which companies are worth a closer look, and it makes your criteria explicit so you can test and revisit them.

## How to use the Stock Screener

1. **Add your first filter.** In the *Filters Configuration* card, type into the *Search 159 filters...* box (for example "dividend") and pick a result, or click *Add Filters* to open the full filter browser. The browser lists categories on the left and opens on *Most Popular*. It shows a short description under each filter. Click a filter to add it; added filters are marked *Added*, and the footer counts how many are *Selected*.
2. **Set the condition and value.** Each active filter appears as a chip showing *Any* until you set it. Click the chip to choose a condition:
   - ***Over***: the value or higher.
   - ***Under***: the value or lower.
   - ***Between***: inside a *Min* and *Max* range, including both ends. You can leave one side empty.
   - ***Exactly***: equal to the value as shown in the table, which is rounded to two decimals (for example `15` matches a P/E of 15.004 but not 15.03).

   Pick a preset from the list or type your own value. Shorthand works: `10B`, `500M` and `100K` for amounts, `2%` or `2` for percentages. The small arrow buttons step the value up or down through the presets.
3. **Use checkbox filters for categories.** Filters such as *Sector*, *Industry*, *Country*, *Analyst Rating*, *Dividend Payout Frequency*, *Earnings Date* and the moving-average filters (for example *Price above SMA200*) show checkboxes instead of numbers. Tick one or more options.
4. **Combine filters.** Every filter you add narrows the list further. The counter under the filters shows the number of *Matches* and *active filters*.
5. **Review the results.** The table opens on the *Filters* tab, which shows one column for every active filter. Switch tabs to see other data for the same matches (see below).
6. **Sort, search and page.** Click a column header to sort. Use *Search stocks...* to find a ticker or company name within the results. At the bottom, choose 20, 50 or 100 rows per page; your choice is remembered in your browser.
7. **Start over or remove one filter.** Click the *X* on a chip to drop that filter, or *Reset All* to clear everything.
8. **Save or start from a template (Pro).** *Popular Screeners* loads a ready-made screen. *Save Screener* stores your current filters under a name; when a saved screen is open, the button offers *Save Changes* and *Save as Copy*. Open or delete saved screens from the *Saved Screeners* menu.

## How to read the screener results

**The result tabs.** The table always starts with *Symbol* and *Name*; click a symbol to open that stock's page. The other columns depend on the tab:

| Tab | Columns |
|---|---|
| *Filters* (badge shows the filter count) | Market Cap plus one column per active filter |
| *General* | Market Cap, Price, % Change, Volume, PE Ratio |
| *Performance* | Market Cap, Price Change 1W, 1M, 3M, 1Y |
| *Analysts* | Market Cap, Analyst Rating, Analyst Count, Price Target, Price Target Upside |
| *Dividends* | Market Cap, Annual Dividend, Dividend Yield, Payout Ratio, Dividend Growth |
| *Financials* | Market Cap, Revenue, Operating Income, Net Income, Free Cash Flow, EPS |

There is no separate column picker: **the way to customize columns is to add filters.** A filter left at *Any* adds its column to the *Filters* tab without removing any stocks. Stocks with no value for a column show "-" there.

**Matches and order.** *Matches* is the number of stocks that pass every filter. Results are listed from largest to smallest market cap until you sort by another column. When you sort, stocks with no value for that column always go to the bottom.

**Colors.** Green and red mark positive and negative values for percentage metrics such as price changes, margins and Price Target Upside. While the page is open, the price, % change, volume and market cap of the rows you are viewing update from a live price stream, and a price briefly flashes green or red when it changes.

**Common filters and what high or low means:**

- **Market Cap** = share price × shares outstanding. Under $2B is usually called small cap, $2B to $10B mid cap, over $10B large cap.
- **PE Ratio** = price ÷ earnings per share. Lower means you pay less for each dollar of profit, but a very low P/E can signal shrinking earnings. Loss-making companies have a negative P/E, so *Under 20* also lets them through unless you add a profitability filter.
- **Dividend Yield** = annual dividends per share ÷ price × 100%. Many dividend screens look for 2% to 5%. Yields far above that often reflect a falling share price or a dividend at risk.
- **Profit Margin** = net income ÷ revenue × 100%. Above 10% is solid for most industries; software and some consumer brands run far higher, grocers and retailers far lower.
- **Payout Ratio** = dividends ÷ net income. Under about 60% leaves room to keep paying if profits dip.

## Worked example: profitable large caps with a low P/E and a dividend

Goal: find large, profitable companies that look modestly valued and pay a meaningful dividend.

1. Add *Market Cap* → *Over* → `10B`.
2. Add *PE Ratio* → *Under* → `20`.
3. Add *Dividend Yield* → *Over* → type `2%`.
4. Add *Profit Margin* → *Over* → `10%`. This removes companies with negative earnings that slipped through the P/E filter.

Some of the matches in the screener data from **November 10, 2026**, listed in the default market-cap order:

| Symbol | Market Cap | PE Ratio | Dividend Yield | Profit Margin | Sector |
|---|---|---|---|---|---|
| XOM | $671.1B | 16.91 | 2.50% | 10.46% | Energy |
| CVX | $412.6B | 15.47 | 3.33% | 11.95% | Energy |
| BAC | $349.6B | 12.09 | 2.29% | 16.49% | Financial Services |
| PEP | $195.3B | 18.01 | 4.05% | 11.10% | Consumer Defensive |
| VZ | $191.9B | 11.81 | 6.07% | 11.78% | Communication Services |
| QCOM | $184.7B | 13.62 | 2.09% | 31.60% | Technology |

What the columns tell you:

- **The list leans toward energy and banks.** That is typical for a low-P/E, high-yield screen, because those sectors usually trade at lower multiples. Add a *Sector* filter or compare each stock with its own sector before reading much into a low P/E.
- **Verizon's 6.07% yield stands out.** Check the *Dividends* tab: the *Payout Ratio* and *Dividend Growth* columns show whether the dividend is well covered and growing.
- **Qualcomm's 31.6% margin** is far above the rest. High margins with a low P/E can mean the market expects earnings to fall, so the next step is the company's [statistics](/stocks/QCOM/statistics) and financial statements.

From here, open any symbol for the full stock page, or run a valuation in the [DCF Calculator](/dcf-calculator).

## Limitations and common mistakes

- **Filters use the scheduled data.** The rows on screen get live price updates, but the filters themselves (including Price, Market Cap and P/E) use the data refreshed five times each weekday and twice on weekends. A stock can still appear under *Market Cap Over 10B* after an intraday drop below it, and price-based ratios can lag by hours.
- **Missing data excludes stocks from filters you set.** A stock without a value for a filter you have set (for example no dividend, no analyst coverage or no P/E) is dropped rather than guessed. Filters left at *Any* keep these stocks and show "-" for the missing value.
- **Negative P/E passes "Under".** Pair P/E filters with *EPS*, *Net Income* or *Profit Margin* to keep only profitable companies.
- **Mixed currencies and fiscal years.** Foreign companies and ADRs report in other currencies and on different fiscal calendars. Prices are shown in the trading currency and financial amounts in the currency the company reports in, and trailing figures may cover slightly different periods.
- **No OTC stocks.** Over-the-counter listings are not included.
- **A match is not a verdict.** Screens are only as good as the criteria. Read the company's filings and check how the metric has moved over time before drawing conclusions.

## Where the data comes from

- **Original source:** each company's reported financial statements, plus daily market prices.
- **How fresh it is:** the screening data is refreshed around 5:15 AM and 8:15 PM New York time every day, plus 11:00 AM, 2:00 PM and 4:15 PM on weekdays. Prices for the rows on your screen update live.
- **Calculated by bestshares.com:** derived metrics such as growth rates, CAGRs, margins, Graham Number and Lynch Fair Value, moving averages and technical indicators.
- **Instant results:** filters apply as soon as you change them, without reloading the page.
- **Saved Screeners** are stored with your bestshares.com account.

## Frequently asked questions

### Is the stock screener free?

Yes. Anyone can add filters, view and sort the results, and switch between the result tabs. Popular Screeners, Saved Screeners, CSV and Excel downloads and a small set of advanced filters (such as Rating, Price Target Upside, Piotroski F-Score and Altman-Z-Score) require a Pro plan.

### Do the filters use AND or OR logic?

AND. A stock appears in the results only if it passes every active filter. The one exception is inside a single list-type filter such as Sector or Country, where ticking several boxes matches any of them.

### What is a good P/E ratio to screen for?

There is no universal cutoff. Many value screens use a P/E under 15 or 20, but normal levels differ a lot by sector; banks and energy companies often trade at lower multiples than software firms. Compare a stock's P/E with its peers and its own history rather than with a single number.

### How often is the screener data updated?

The screening data is refreshed five times each weekday and twice on weekends (New York time), and your filters run on that data. While the page is open, the rows you are viewing also get live price, % change and volume updates, but ratios such as P/E only change with the scheduled refresh.

### Why does a stock I expect to see not show up?

Usually because it has no value for one of the filters you have set (for example no dividend, or no P/E because earnings are negative), or because it trades over the counter. Stocks with missing data for a filter you have set are excluded rather than guessed; filters left at Any never remove a stock. Remove filters one at a time to find the one that removes it.

### Can I save my screen and use it later?

Pro members can click Save Screener, give the screen a name of up to 30 characters, and reopen it later from the Saved Screeners menu. Saved screens can be updated with Save Changes, copied with Save as Copy, or deleted.

Open the tool: https://bestshares.com/stock-screener
